Low-Profile 3D Sleep Mask in Black
Worn while sleeping on the side, the thin side wing flat against the pillow
Inside of the mask: two deep eye cavities, cushioned border, nose flaps and strap sliders
Close-up of the depth inside an eye cavity
The nose cutout and flaps following the bridge of the nose
A bulky foam mask next to this mask on a pillow

Low-Profile 3D Sleep Mask

Stop choosing between blackout and comfort.

4.9 · 1,324 reviews

For side sleepers who are done with masks that either dig in against the pillow or slide off it.

$59.99

Color: Black

1
  • Tapered side wings that lie flat where your temple meets the pillow
  • Deep eye cavities, so your lashes aren't brushing fabric all night
  • Wraps around the sides and down beside the nose, where light usually gets in
What it's made of

One-piece molded 3D foam shell with a soft knit cover. Flat elastic strap with two adjustment sliders.

Care

Hand wash in cool water with a mild detergent. Press out the water gently, don't wring, and let it air dry flat so the cups keep their shape.

Sound familiar?

Why does your sleep mask become the problem?

  1. You put it on
  2. Light creeps in by your nose
  3. You tighten the strap
  4. Now it presses on your eyes
  5. You roll onto your side
  6. The pillow shoves it into your temple
  7. You loosen it
  8. By 3 AM it's halfway up your forehead
Tighter

Blocks the light and stays put — until the pressure wakes you up.

Looser

Feels better for an hour — until it shifts and the light gets back in.

Most masks leave you adjusting between the two all night. This one was shaped so you don't have to.

How it's built

Designed around what usually wakes side sleepers up.

Sleeping on her side in the mask, its thin side wing lying flat against the pillow

Thin where your pillow hits

Your pillow shouldn't turn your sleep mask into a pressure point.

On a lot of 3D masks the foam is just as thick at the sides as it is over the eyes. Lie on your side and that ridge gets pushed straight back into your face. Here the side wings taper gradually thinner toward the strap, so the part between your temple and the pillow is the slimmest part of the mask.

Close-up inside one of the deep eye cavities

Deep where your eyes need space

Give your eyes room to actually rest.

Flat masks lie directly on your eyelids. Each eye here gets its own deep, molded cavity, ringed by a cushioned border that rests on your brow and cheekbone instead. Blink, open your eyes, keep your lash extensions: the fabric stays off them.

The nose cutout and side flaps following the bridge of the nose in morning light

Sealed by shape, not tension

Darkness shouldn't require squeezing your head.

That sliver of morning light usually comes in beside your nose, and most masks only fix it if you cinch the strap. This one is shaped to follow your face: a curved nose cutout with soft flaps that come down alongside the bridge, and a wraparound body that curves back toward your temples. The strap can stay comfortable, and the light still stays out.

Inside of the mask: two eye cavities, cushioned border, nose flaps and strap with two sliders

Stays put without the squeeze

Comfort shouldn't mean waking up with your mask halfway across your face.

A flat mask depends entirely on strap tension to stay put. This one wraps around the contour of your face, so the shape does part of the holding.

  • Wraparound shellCurves back toward your temples instead of sitting flat on your face.
  • Cushioned borderRests on your brow and cheekbones, not your eyes.
  • Two strap slidersSet the fit once. Slide them back behind your ears, where the pillow doesn't press.

Side by side

What your pillow actually presses on.

Plenty of masks say "3D." What matters when you sleep on your side is where the material is, and where it isn't.

A bulky foam mask with a thick outer rim beside this mask, whose side wing lies low on the pillow Typical bulky mask This mask
Typical bulky 3D maskThis mask
Outer edgeThick foam rim, same height all the way aroundSide wings taper thinner toward the strap
What the pillow pressesThe thickest part of the maskThe thinnest part of the mask
Eye spaceShallow cups can still touch your lashesA deep molded cavity for each eye
Around the noseA gap that only closes if you tighten the strapNose cutout with side flaps that follow the bridge
How it stays onStrap tension aloneWraparound shape plus an adjustable strap

If you've tried a mask before

You already know what a sleep mask does. The question is whether you'll still want it on at 3 AM.

You don't need convincing that darkness helps. You need a mask that doesn't create a new problem the moment you roll over.

  • Light around the noseNose flaps that follow the bridge
  • Sliding off overnightA wraparound shape that holds
  • Pressure from the pillowTapered side wings
  • Wearing it tight to stay darkSealed by shape, not tension
  • Lashes touching the insideDeep eye cavities
  • A buckle digging into your earSliders that sit behind the ear

Reviews

From people who sleep on their side.

4.9
1,324 reviews

96% would recommend it to another side sleeper.

Questions

The things you'd ask after the last mask.

Will it work if I sleep on my side?

That's the position it's shaped around. The side wings taper thinner toward the strap, so the part of the mask between your temple and the pillow is the slimmest part. Pillows and faces vary, so a very firm or very high pillow will still press more than a soft one.

Will my eyelashes touch the mask?

Each eye has its own deep molded cavity, and the cushioned border around it rests on your brow and cheekbones rather than your eyelids. That keeps the fabric in front of your lashes, not on them.

Does it block light around the nose?

The nose cutout has soft side flaps that come down alongside the bridge of your nose, which is where most masks leak. Nose shapes differ a lot, though. If yours is especially narrow or high-bridged, a small gap is still possible, and gently pressing the flaps in toward your nose usually closes it.

Will it stay on if I move around at night?

The mask wraps around the contour of your face instead of sitting flat, so the shape does part of the work and the strap doesn't have to be tight. Set it snug but comfortable once, then leave it alone.

Does the strap or buckle sit on my ears?

The strap is a flat elastic band with two small sliders for adjusting it. Once you've set the fit, slide them back behind your ears so nothing hard ends up between your ear and the pillow.

Will it get hot?

It has a soft knit cover over a molded foam shell. Any mask adds a layer over your face, so if you run very warm at night you may still notice it. We'd rather tell you that than promise it sleeps cold.

How do I wash it?

Hand wash in cool water with a mild detergent. Press the water out gently rather than wringing it, then let it air dry flat so the eye cavities keep their shape.

The mask on a nightstand beside a ceramic cup and a book in warm evening light

Your mask should disappear when your head hits the pillow.

No tightening to keep it dark. No loosening to make it bearable. Put it on, roll onto your side, and forget it's there.